<output id="026li"><tbody id="026li"><var id="026li"></var></tbody></output>
    <table id="026li"></table>

  • 龍盛官方論壇
    正在驗證會員信息...
    sheet extruding machine,cup making machine,vacuum forming machine,cup printing machine,straw machine,plastic granulator,coiling machine,punching machine,crusher,cup stacking machine
    立式、臥式、斜式、斜臥式四種三輥XBZD100/70-900斜式多層共擠片材機組
    今日發帖數: 0|昨日發帖數: 0|帖子數: 2142|會員數: 200
    版主: shiela
    回復數量: 1
    發表回復 發表主題
    查看: 2061 | 回復: 1
    管理員 shiela
    等級:
    上將
    發帖:
    389/239
    積分:
    35649
    經驗值:
    235606
    上次發言:
    11-17 10:32
    收藏(0)720*530III全自動微電腦正壓成型機

    720*530III全自動微電腦正壓成型機

     

    1. 送片,合模,拉伸和成型等動作均采用先進的液壓與氣動技術控制。

    2. 整機具有運行穩定,動作有力,高效和節能等。

    加熱箱由、縱向8段,橫向4段,共12段組成,12段的溫度分布合理,使加熱均勻。

    4. 機器具有運用廣泛,操作可靠,低噪音,性能穩定和成品檔次高。

     

    Technical parameter:

    Model型號

    ZDY-720*530III

    總功率

    ≤110kw

    成型面積 

    720mm×530mm

    空氣壓力

    0.6-0.8mpa

    成型深度 

    ≤180mm

    耗氣量

    2000L/MIN

    成型速度 

    ≤16-35moulds/min

    要求水量

    ≤0.5M3/H

    片材要求

    ≤720mm,thickness 0.3-1.8mm

    機器尺寸

    3470mmx1670mmx2850mm

    適用材料 

    PP,PS,PE,PET HIPS,PVC

    總重量

    7tons

     

    II. Machine component

    1.  制杯主機             1unit

    2.  電屏柜                1unit

    3.  聯機式送片           1unit

    3.  聯機式收卷           1unit

    4.  不銹杯罩             1pc

     

    IV. Main Configuration of the machine

    油泵電機

    江門江晟15KW

    送片電機

    臺灣東歷

    收卷電機

    速博雷爾 浙江

    拉伸閥

    日本SMC

    溫控表

    日本富士

    氣動電磁閥

    SMC日本

    氣缸

    臺灣亞德克

    拉伸氣缸

    臺灣亞德克

    發熱瓦片

    東臺/江蘇

    控溫模塊200A

    廈門導電

    程序接近開關

    歐姆龍  日本

    按鈕

    施耐德

    PLC

    三菱  日本

    接觸屏

    臺灣威綸

    液壓閥

    東風 臺灣

    液壓泵

    榆次

     

    V. Other detail of the machine

    1. 機架由100型及120型槽鋼焊接而成,結構合理;

    2. 上下工作模臺采用球墨鑄鐵(QT500-7)剛性強,耐沖擊;

    3. 模具工作模臺上下移動采用4導柱及導套正行導正,導正能力強,使整機運行平穩,模具刀口壽命長;

    4. 導柱材料采用40Cr鋼經過調質處理、電鍍硬鉻磨成鏡面;

    5.送片傳動方式采用臺灣東歷減速電機1臺,功率3.7KW,配日本富士變頻器調速,送片準確,力量大性能穩定

    6. 送片鏈軌采用4/8”帶齒雙排鏈送片,冷卻采用不銹管冷卻;

    7. 加熱箱采用不銹鋼板壓制而成,加熱分為上、下及預加熱箱,配江蘇陶瓷加熱瓦片,加熱外側配有保溫裝置,節約用電;上下電爐由氣缸推動自動移出;上電爐可向前移動完全靠近模臺

    8. 加熱方式加熱箱由、縱向8段,橫向4段,共12段組成。;

    9. 成型拉伸采用氣缸規格?160×175mm,速度快,起著提高產品透明度及均勻度;

    10.合模及自動沖剪采用注塑機原理,由液壓油缸驅動連桿裝置進行上下傳動,行程220mm,速度快,噪音低,高產量高,油缸采用進口密封圈,連桿副由球墨鑄件內藏38crmoA1A鋼套及鋼軸組成,有耐磨性強,使用壽命長等特點;

    11. 收卷方式采用聯機式卷取,主要是收卷產品成沖剪后回收片;

    12.兩個潤滑油泵,分別為五支點和四導柱提供潤滑油

    13. 收取蝸輪減速電機0.37kw
















    圖片列表 - 點擊可放大
    送花(0)臭雞蛋(0)引用回復2018-03-20 15:31 [1樓]
    會員 Tina123
    等級:
    一級士官
    發帖:
    5/120
    積分:
    285
    經驗值:
    285
    上次發言:
    09-11 15:47

    720*530III全自動微電腦正壓成型機

    720*530III automatic microcomputer positive pressure molding machine

     

     

    1. 送片,合模,拉伸和成型等動作均采用先進的液壓與氣動技術控制。

    1. Advanced hydraulic and pneumatic technology is used to control the feeding, closing mold, stretching and forming.

    2.  整機具有運行穩定,動作有力,高效和節能等。

    2. The whole machine has stable operation, powerful movement, high efficiency and energy saving, etc.

    3.加熱箱由、縱向8段,橫向4段,共12段組成,12段的溫度分布合理,使加熱均勻。

    3.The heating box consists of 8 vertical sections, 4 horizontal sections and 12 sections. The temperature distribution of the 12 sections is reasonable to make the heating even.

    4.  機器具有運用廣泛,操作可靠,低噪音,性能穩定和成品檔次高。

    4. The machine has wide application, reliable operation, low noise, stable performance and high finished grade.


     

    Technical parameter:

    Model型號

    ZDY-720*530III

    總功率Total power

    ≤110kw

    成型面積

    Molding area

    720mm×530mm

    空氣壓力

    Air pressure

    0.6-0.8mpa

    成型深度

    Molding depth

    ≤180mm

    耗氣量

    Air consumption

    2000L/MIN

    成型速度

    Molding speed

    ≤16-35moulds/min

    要求水量

    Requirements of water

    ≤0.5M3/H

    片材要求

    Sheet requirement

    ≤720mm,thickness 0.3-1.8mm

    機器尺寸

    Machine size

    3470mmx1670mmx2850mm

    適用材料

    Application material

    PP,PS,PE,PET HIPS,PVC

    總重量

    Total weight

    7tons

     

    II. Machine component

    1.  制杯主機             1unit

    1.Cup making main machine      1unit

    2.  電屏柜                1unit

    2.Electrical cabinets              1unit

    3.  聯機式送片           1unit

    3.Online chip feeding sheet        1unit

    4.  聯機式收卷           1unit

    4.On-line rewinding               1unit

    5.  不銹杯罩             1pcs

    5.Stainless cup                 1pcs

     


    IV. Main Configuration of the machine

    油泵電機

    Oil pump motor

    江門江晟15KW

    Jiangmen Jiangsheng 15KW

    送片電機

    Feeding motor

    臺灣東歷

    Taiwan Dongli

    收卷電機

    Rewinding motor

    速博雷爾 浙江

    Zhejiang SUPERIOR

    拉伸閥

    Stretch valve

    日本SMC

    Japan SMC

    溫控表

    Temperature-controlled meter

    日本富士

    Japan Fuji

    氣動電磁閥

    Pneumatic electromagnetic valve

    SMC日本

    Japan SMC

    氣缸

    Cylinder

    臺灣亞德克

    Taiwan AirTAC

    拉伸氣缸

    Stretch cylinder

    臺灣亞德克

    Taiwan AirTAC

    發熱瓦片

    Heater

    東臺/江蘇

    Jiangsu Dongtai

    控溫模塊200A

    Temperature control module 200A

    廈門導電

    Xiamen Daodian

    程序接近開關

    Program proximity switch

    歐姆龍  日本

    Japan Omron

    按鈕

    Button

    施耐德

    Schneider

    PLC

    三菱  日本

    Mitsubishi Japan

    接觸屏

    Touch screen

    臺灣威綸

    Taiwan Weinview

    液壓閥

    Hydraulic valve

    東風  臺灣

    Taiwan Dongfeng

    液壓泵

    Hydraulic pump

    榆次

    Yuci

     

    V. Other detail of the machine

    1. 機架由100型及120型槽鋼焊接而成,結構合理;

    1. The frame is welded from type 100 and type 120 channel steel, with reasonable structure;

    2. 上下工作模臺采用球墨鑄鐵(QT500-7)剛性強,耐沖擊;

    2. The upper and lower working formwork is made of ductile iron (QT500-7) with strong rigidity and impact resistance;

    3. 模具工作模臺上下移動采用4導柱及導套正行導正,導正能力強,使整機運行平穩,模具刀口壽命長;

    3. The 4 guide posts and guide sleeve are used for the down movement of the mold on the working die platform. With strong ability of guide, the whole machine runs smoothly and the service life of the die edge is long.

    4. 導柱材料采用40Cr鋼經過調質處理、電鍍硬鉻磨成鏡面;

    4. The guide column material is made of 40Cr steel, which is tempered and polished by electroplating hard chromium and grinded into a mirror;

    5.送片傳動方式采用臺灣東歷減速電機1臺,功率3.7KW,配日本富士變頻器調速,送片準確,力量大性能穩定

    5. It adopts one Taiwan Dongli deceleration motor with a power of 3.7kw and a Japanese Fuji frequency converter to adjust the speed

    6. 送片鏈軌采用4/8”帶齒雙排鏈送片,冷卻采用不銹管冷卻;

    6. Feed chain rail adopts 4/8 "double-row chain feed with teeth, and cooling adopts stainless pipe;

    7. 加熱箱采用不銹鋼板壓制而成,加熱分為上、下及預加熱箱,配江蘇陶瓷加熱瓦片,加熱外側配有保溫裝置,節約用電;上下電爐由氣缸推動自動移出;上電爐可向前移動完全靠近模臺

    7. The heating box is made of stainless steel plate, which is divided into upper, lower and pre-heating boxes. It is equipped with jiangsu ceramic heating tiles. The upper and lower electric furnaces are moved out automatically by the cylinder; The upper furnace can be moved forward completely close to the die table

    8. 加熱方式加熱箱由、縱向8段,橫向4段,共12段組成;

    8. Heating method the heating box is composed of 8 vertical sections and 4 horizontal sections, including 12 sections.

    9. 成型拉伸采用氣缸規格?160×175mm,速度快,起著提高產品透明度及均勻度;

    9. The molding tensile with cylinder specification ? 160 x 175 mm, quick speed, raise the product transparency and uniformity;

    10.合模及自動沖剪采用注塑機原理,由液壓油缸驅動連桿裝置進行上下傳動,行程220mm,速度快,噪音低,高產量高,油缸采用進口密封圈,連桿副由球墨鑄件內藏38crmoA1A鋼套及鋼軸組成,有耐磨性強,使用壽命長等特點;

    10. Closing mold and automatic punching shear adopt the principle of injection molding machine, driven by hydraulic cylinder connecting rod device for up and down transmission, 220mm stroke, fast speed, low noise, high output, oil cylinder adopts imported sealing ring, connecting rod pair is composed of 38crmoA1A steel sleeve and steel shaft inside the ductile ink casting, with strong wear resistance, long service life and other characteristics;

    11. 收卷方式采用聯機式卷取,主要是收卷產品成沖剪后回收片;

    11. The rewinding method adopts on-line rewinding, which is mainly used to recycle the rewinding products into punching and shearing sheet;

    12.兩個潤滑油泵,分別為五支點和四導柱提供潤滑油

    12. Two lubricating oil pumps, one for the five fulcrum and the other for the four guide columns

    13. 收取蝸輪減速電機0.37kw

    13. Receive the worm gear reduction motor 0.37kw

    送花(0)臭雞蛋(0)引用回復2020-05-10 11:20 [2樓]
    回復: 1
    發表回復
    您需要 登錄注冊 后才可以回帖